Monthly Archives: mai 2014

Recompiler son noyau Raspberry PI

zcat /proc/config.gz > /boot/.config

mkdir rpi_kernel_VSTY2662-V1_AT070TN92_TouchScreen
cd rpi_kernel_VSTY2662-V1_AT070TN92_TouchScreen
git clone -b rpi-3.10.y https://github.com/raspberrypi/linux.git

(git clone https://github.com/raspberrypi/linux.git)

cd linux/
make mrproper
mkdir ../kernel
make O=../kernel/ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- bcmrpi_cutdown_defconfig
make O=../kernel/ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- xconfig
make O=../kernel/ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- -k -j3
cd ../
git clone git://github.com/raspberrypi/tools.git
cd tools/mkimage/
./imagetool-uncompressed.py ../../kernel/arch/arm/boot/Image
cd ../../kernel/
mkdir ../modules/
make modules_install ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- INSTALL_MOD_PATH=../modules
cd ..
wget https://github.com/raspberrypi/firmware/archive/master.tar.gz

tar -zxvf master.tar.gz

(git clone https://github.com/raspberrypi/firmware.git)